The Right Recipe for Scraped Surface Heat Exchangers | HRS

The Right Recipe for Scraped Surface Heat Exchangers

October 17, 2023 | Categories: Food - Opinion Piece | by

While corrugated tube heat exchangers are excellent for many food industry applications, some more challenging processes – such as pasteurising or cooling thick, viscous products like creams, sauces and even meat products – require a more robust solution in the form of scraped surface heat exchangers.


As the name suggests, scraped surface heat exchangers (SSHEs) use scrapers to perform a number of functions. Firstly, and most importantly, the scrapers constantly remove product from the tube surface to prevent the build-up of a fouling layer which would otherwise reduce heat transfer. Secondly, the scraper provides a mixing action within the product as it passes through the heat exchanger, ensuring that heating or cooling occurs evenly within the product. Finally, in many designs, the design actually helps push the product through the tube, ensuring even flow and heat transfer.

HRS Heat Exchangers offers two models of scraped surface heat exchanger. The Unicus Series uses a patented design to provide a reciprocating scraper movement cleaning the heat exchanger surface and enhances heat transfer by increasing turbulence. In contrast, the R Series uses a rotating helical screw to enhance product flow and turbulence and keep the tube surface clean.


Different materials have different handling requirements, and while the process being undertaken (for example cooling or pasteurisation) is also an important factor, product identity is the most important consideration for both client and engineer: there is no ‘one size fits all’ solution. Having said that, SSHEs are commonly used for viscous food products with a high fouling potential, such as creams and sauces, purees, meat mince and slurry, and many others.

SSHEs typically consist of two key components within the tube: the scrapers, which move against the inside surface of the tube to remove fouling, and a mechanism (known as the scraper bar), which holds and drives the scrapers.


Because of the increased resistance within the tube, SSHEs can create much higher pressure drops than open tube heat exchangers. A higher pressure drop means more pressure (and therefore more energy) is required to operate the equipment, and in some cases the higher pressure can create a shearing force which physically splits or damages the product (for example sauces and emulsions).


In the simplest terms, reciprocal heat exchangers like the HRS Unicus Series are suitable for viscous products which require gentle handling (such as creams or products containing pieces which you want to keep intact), while the rotating R Series is more suitable for products which actually benefit from vigorous handling or mixing (for example, mixed fruit purees). The type of heat exchanger will also be influenced by the temperature rise (or fall) required and the heating or cooling medium employed.

There are also other considerations, such as the pressure drop encountered through the heat exchanger, the heating medium, and whether you will need to recover product. These factors may suggest that the R Series is more suitable, but with more than 40 years’ experience, the HRS team will be able to advise on the best solution for your particular situation.