HEAT EXCHANGERS

HRS Heat Exchangers operates in the forefront of thermal technology, offering innovative and effective heat transfer products worldwide, focusing on managing energy efficiently.

With over 35 years’ experience specializing in design and manufacture of an extensive range of corrugated tube and scraped surface heat exchangers, in compliance with the European Pressure Vessel Directive.

Our heat exchangers fall into three main categories:

Corrugated Tube Heat Exchangers

Using HRS’ corrugated tube technology, both heat transfer and efficiency are increased over standard smooth and dimple tube heat exchangers. In addition, potential product fouling is minimized. This makes it possible for HRS to provide more compact and economical heat exchanger solutions.

HRS offers three types of corrugated tube heat exchangers:

Scraped Surface Heat Exchangers

For difficult heat transfer applications, with high viscosities and where fouling can become a problem, the preferred option is a scraped surface heat exchanger. The reciprocating or rotating movement of the scrapers mixes the fluid whilst cleaning the heat exchange surface. This keeps heat transfer high and reduces downtime. In addition, an increase in the turbulence increases the level of heat transfer.

HRS offers two technologies for scraped surface heat transfer: Unicus series which reciprocates and R series which rotates. Both of these patented solutions are designed for specific needs.

Plate Heat Exchangers

HRS plate heat exchangers are ideal for applications where the fluids have relatively low viscosity with no particles. They are also an ideal choice where product outlet temperature is close to the service inlet temperature.

 

Product Brochure

_HRS Heat Exchanger Range
Double Tube Heat Exchangers
_HRS DTA Series Double Tube Heat Exchangers

Double Tube Heat Exchangers

A double tube, or tube-in-tube, heat exchanger is used for efficient heat transfer between two fluids.

Learn More
Multi Tube Heat Exchangers
_HRS Multi Tube Heat Exchangers

Multi Tube Heat Exchangers

As the name suggests, a multi tube heat exchanger uses more than one tube to carry the product. The product to be heated or cooled flows through the interior tubes. The media fluid flows through the surrounding shell. HRS produces a range of different multi tube heat exchangers for use in a wide range of…

Learn More
Annular Space Heat Exchangers – HRS AS Series
_HRS Annular Space Heat Exchangers

Annular Space Heat Exchangers – HRS AS Series

The HRS AS Series is a fully stainless steel heat exchanger consisting of three concentric tubes. The product flows through the annulus between the outermost and innermost tubes, and the media fluid flows in the other two channels. The product is therefore heated or cooled from both sides.  

Learn More
Scraped Surface Heat Exchangers
_HRS Heat Exchangers

Scraped Surface Heat Exchangers

HRS Heat Exchangers designs and manufactures scraped surface heat exchangers for applications where either one or both of the following problems require special solutions: Fouling causes heat transfer rates to drop and viscous fluids having very low heat transfer rates.  

Learn More
Plate Heat Exchangers
_HRS Plate Heat Exchangers

Plate Heat Exchangers

HRS plate heat exchangers are ideal for applications where the fluids have relatively low viscosity with no particles. They are also an ideal choice where product outlet temperature is close to the service inlet temperature. Plate heat exchangers consist of thin, corrugated plates packed inside a frame, with the product in alternate channels, and service…

Learn More

© 2017 HRS Heat Exchangers. All Rights Reserved

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close