Resources

ISO 9001 Quality Assurance Accreditation
October 28, 2016

QUALITY POLICY The management team of HRS Heat Exchangers (HRS) is committed and responsible for establishing, implementing and maintaining the Quality Management System to ensure customer satisfaction, employee participation and continuous company development. Every HRS Employee is committed to provide the highest standard of quality on all of our products and services to ensure both…

Read More
Computational Fluid Dynamics in Heat Exchanger Design and Analysis
September 28, 2016

Recently we were approached by a customer that had several condensers installed which were giving performance problems. The condensers simply did not perform to their capacity. The customer was worried that the problem did not lie in the condenser design but in the product inlet header. The suspicion was that the product flow into the…

Read More
Advantages of Corrugated Tubes
August 17, 2016

Introduction A large number of industries use processes in which heat is transferred between different fluids (or gasses). The basic principle of heat transfer is extremely simple: two fluids at different temperatures are placed in contact with a conductive barrier (the tube wall) and heat is transferred from the hotter fluid to the colder fluid…

Read More
Aseptic Filling Fundamentals
August 17, 2016

General One of the things needed to produce a pasteurized product with a long life which can be distributed at ambient temperature is aseptic packaging. This technology differs from conventional canning techniques in that the containers are pre-sterilized and then filled with cold product in a cold environment in commercially sterile conditions, before being closed…

Read More
Comparison of Laminar and Turbulent Flow
August 17, 2016

Heat Transfer Flow Regimes One of the important factors controlling heat transfer is the resistance to heat flow through the various “layers” that form the barrier between the two fluids. The driving force for heat transfer is the difference in temperature levels between the hot and cold fluids, the greater the difference the higher the rate…

Read More
Fouling Factors in Heat Exchangers
August 17, 2016

The fouling factors to be used in the design of heat exchangers are normally specified by the client based on their experience of running the plant or process. If uncontrolled, levels of fouling can negate any benefits produced by careful heat exchanger design. The fouling factor represents the theoretical resistance to heat flow due to…

Read More
Heat Transfer Fundamentals
August 17, 2016

Introduction As noted here, the basic principle of heat transfer is extremely simple, two fluids at different temperatures are placed in contact with a conductive barrier (the tube wall) and heat is transferred from the hotter fluid to the colder fluid until they reach the same temperature level. In industrial processes, this is carried out…

Read More
How to Design a Tubular Heat Exchanger?
August 17, 2016

How to Design a Tubular Heat Exchanger At HRS Heat Exchangers we design tubular heat exchangers every day. This section provides an overview of the process. Step 1: Analyzing the Application When we first receive an inquiry for a heat exchanger, the first step is to analyze the application. Is it a food industry application?…

Read More
Thermal Treatment in Food Industry
August 17, 2016

The thermal treatment of food is necessary in order to: Reduce the microbiological flora present in the food Avoid alterations produced in the food by non-pathogenic micro-organisms Apply the appropriate amount of heating/cooling to each of the foods in question The four principal objectives of the application of thermal treatment are: Destroy micro-organisms which could…

Read More
Types of Packaging for Foods and Beverages
August 17, 2016

Various types of aseptic packaging have been developed over the years as a result of different demands. This page highlights some of the key steps in the evolution of modern food packaging. Cans Some estimates suggest canned good account for up to 90% of some markets, although share is being lost to more modern forms…

Read More
Acrylamide Reduction in Industrial Food
August 17, 2016

Acrylamide, also known as 2-propenamide or acrylic amide, is a chemical substance has a role in making polyacrylamide, which in turn is used in inks, in flocculants for water treatment, in cement production and the production of plastics. The World Health Organization (WHO) has established a maximum level for drinking water of 0.5 mg/gallon and…

Read More
Pressure Equipment Directive 2014/68/EU Categorization
August 17, 2016

Introduction to 2014/68/EU – Pressure Equipment Directive (Formerly known as Directive 97/23/EC)  All equipment with the maximum allowable pressure greater than 0.5 Bar above atmospheric pressure must be assessed in accordance with the European Pressure Equipment Directive 2014/68/EU and if necessary designed and manufactured in accordance with the requirements contained within the Directive. This equipment can…

Read More

© 2017 HRS Heat Exchangers. All Rights Reserved

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close