_HRS BP Series - UHT Plant
_HRS Piston Pumps - BP Series - Wine Must Application

Piston Pumps – HRS BP Series

HRS BP Series piston pumps are hydraulically operated positive displacement pumps that transfer mechanical energy as pressure energy. They feature a sanitary design which incorporates a separator fitted between the piston and the hydraulic chamber to ensure that there is no contact between the product chamber and the hydraulic oil. Once the pump is in operation, no part which comes into contact with oil comes into contact with the product.

The sanitary design and suitability for CIP cleaning makes this pump suited to food processing applications where product integrity and shape must be guaranteed. Hence it is especially suited to pumping delicate and viscous fluids and products containing particles with a low shear rate, such as fruit dices.

BP Series pumps are driven by a hydraulic power pack which drives a hydraulic cylinder from alternate directions, moving the piston up and down. The pump housing is split into two chambers, each with an inlet and outlet connection which allows the entry and exit of large particles. It has an adjustable flow, which can range from a minimum of 0.8 gallons/minute to a maximum of 53 gallons/minute, and features a high-pressure drop of up to 441 PSI.

Clap valves allow pumping of whole fruits or vegetables, and an Alternative piston pump with a pneumatic cylinder can be supplied for low-pressure applications of less than 72 psi.

The HRS BP Series piston pump is designed to operate in a wide range of applications, including:  

  • High viscosity fluids
  • Shear sensitive fluids
  • (Aseptic) food applications
  • Fluids with large particles
  • Industrial applications



  • Product Wetted Parts: AISI 316L Stainless Steel
  • Cylinder: Carbon Steel and Anti-Corrosive Coating
  • Service Side: AISI 304 Stainless Steel

Standard Connections:

  • Service Side: clamp
  • Product Side: clamp

Surface Finish:

  • External: satin or polished
  • Product Side: <0.8 microns

Standard design temperature: 248℉.

It can work under vacuum and can pump up to very high pressures (435 psi maximum).

applications related to related to Piston Pumps – HRS BP Series

© 2018 HRS Heat Exchangers. All Rights Reserved

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.